Free PCB tools for KiCad and Altium · no sign-up, nothing to install
PCB autorouter for KiCad, online and free
Upload a .kicad_pcb with your parts placed. Koppar routes the open nets of the PCB, keeps the copper you already drew, refills the zones and sends the board back with its KiCad DRC report.
How it works
- Place your parts in KiCad’s PCB editor and save the board.
- Upload the .kicad_pcb. Add its .kicad_pro (and .kicad_dru, if you have custom rules) so the board is routed and checked against its own track widths and clearances.
- Keep “Keep existing copper” ticked to route only the open nets, then run. Leave an email address if you would rather not wait on the page.
- Download the routed board, open it in KiCad and review it. The KiCad DRC report comes with it.
Questions
Does KiCad have an autorouter?
Not built in. KiCad’s PCB editor has an interactive router that lays out one track at a time as you draw, but nothing that routes the whole board for you: automatic routing goes through an outside tool. This page is one: upload the placed .kicad_pcb and it comes back routed, with your existing copper kept. The Koppar plugin does the same from inside KiCad.
Is the PCB autorouter free?
Yes, with no account, for boards up to the free size and a few runs a day. A larger board runs with an API key from a free Koppar account; the page tells you before anything runs.
What if not every net can be routed?
You get the board back with everything that was routed, and the DRC report lists the connections still open, so you can finish them by hand in KiCad.
How long does routing take?
Seconds for a small board, up to twenty minutes for a large, dense one. You can close the tab and get an email when it is done.
Will it remove the tracks I already drew?
No. Your copper stays as drawn while “Keep existing copper” is ticked; untick it to route the whole board from scratch.
What happens to my board?
Uploaded files and results are deleted after 24 hours.
Other free PCB tools
- PCB design rule check for KiCad, in the browserRun KiCad’s design-rule check on any PCB.
.kicad_pcbOpen tool - KiCad PCB to Gerber files, IPC-2581 and ODB++Gerber files, IPC-2581 or ODB++ for your PCB fab.
.kicad_pcbOpen tool - Online Gerber viewerSee Gerber and drill files as the fab will: top, bottom, every layer.
.zip, .gbrOpen tool - Online PCB viewer for KiCad filesSee a PCB layer by layer, from a file or a GitHub link.
.kicad_pcbOpen tool - Online schematic viewer for KiCadEvery sheet of a .kicad_sch as an SVG, no KiCad needed.
.kicad_schOpen tool - PCB footprint viewer for KiCadCheck a PCB footprint: pads, courtyard, silkscreen.
.kicad_modOpen tool - Netlist to a routed PCB layoutFrom a netlist to a placed, routed, DRC-checked PCB.
.netOpen tool - Netlist to KiCad schematicTurn a KiCad netlist into a readable multi-sheet schematic.
.netOpen tool - KiCad netlist viewerInstant sanity check of a netlist before PCB layout.
.netOpen tool - Altium to KiCad converter, design rules includedAn Altium .PcbDoc as a KiCad project, its design rules carried.
.PcbDocOpen tool - Altium PCB viewer: open a .PcbDoc in the browserOpen an Altium board without Altium: every copper layer as an SVG.
.PcbDocOpen tool - Altium .PcbDoc to Gerber filesGerber and drill files from an Altium .PcbDoc, no licence needed.
.PcbDocOpen tool - Altium schematic BOM, straight from the .SchDoc sheetsThe bill of materials of Altium .SchDoc sheets, as a CSV.
.SchDocOpen tool
Your next board, from one sentence
Describe the circuit in plain English. Koppar designs the schematic, places and routes the board with zero DRC errors, prices the BOM from live stock and exports the Gerbers. Your first three designs are free.
Design a board from a sentence