Free PCB tools for KiCad and Altium · no sign-up, nothing to install

Altium .PcbDoc to Gerber files

Upload a .PcbDoc and download Gerber files with Excellon drills: every copper layer, solder mask, paste, silkscreen and the board outline. Copper pours are plotted as Altium filled them, not redrawn.

How it works

  1. Upload the .PcbDoc.
  2. Gerber files are plotted for every copper layer, solder mask, paste, silkscreen and the outline, with Excellon drill files, plated and unplated holes apart.
  3. Download gerbers.zip and open it in the Gerber viewer on this site to check every layer.
  4. Upload the ZIP to your fab.

Questions

Can I make Gerbers without an Altium licence?

Yes. Upload the .PcbDoc and the Gerbers and drills come back in a ZIP most fabs take as it is.

Are they the same Gerbers Altium would write?

Not byte for byte: the board goes through KiCad’s Altium importer first. Copper, pours as Altium filled them, holes and outline come across; solder-mask and paste expansions set by Altium rules may differ. Check the layers in the Gerber viewer before you order, and when the designer sent Altium’s own outputs, those are the reference.

Which drill format?

Excellon in millimetres, plated and unplated holes in separate files, with a drill map.

What happens to my board?

Uploaded files and results are deleted after 24 hours.

Other free PCB tools

Keep working on this board in Koppar

Drop the .PcbDoc and its .SchDoc sheets, or a ZIP of the Altium project, into a Koppar project and say what you want. Route it, check it and take it to a fab as it is; change it, keeping the copper that is still right; or start a new board from it, with the datasheet PDF of any part that is not in the catalogue.

Bring an Altium board into Koppar